Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
- MENU
-
Chemistry
-
Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
Steel shaft, pulley of 70 mm diameter Shaft overhangs the base to allow a wound up weight to fall down.
Easy assembly - no soldering ! The line tracking robot will follow a black line with its tracking sensor. You can design your own route for the robot using a black marker pen, black electrical tape etc. No soldering is required. Asse
Linear air track complete with blower, digital timer, photogates, accessories, boss head, support bar and rod. Square section aluminium alloy track, length 1.5 m, with staggered holes, supported on two light alloy castings. One suppo
Four glass tubes of different shapes & cross sectional areas are connected to a common horizontal tube, on wooden base.
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
Understanding the principles of physics that occur on a roller coaster has become easier. This triple play apparatus consists of three tracks – one straight down, one with one loop, and the third with
To demonstrate conservation of energy, conservation of momentum and projectile motion. Consists of a metal track to drop a steel ball, circular scale for measuring the angle at which the ball drops. Includes two steel balls and instructions. Size:
The set consists of two plastic, 10cm-diameter hemispheres. Each half has a wooden handle firmly attached to it. One of the hemispheres has a raised edge to hold a rubber seal, while the other hemisphere has a stopcock for attaching to vacuum tubi
Converts muscular energy to other forms of energy. 75 mm diameter hand cranked pulley with rubber belt to drive a small pulley of 20 mm diameter to which a drive output pulley is directly attached. Pulley shafts are mounted in bearings on aluminiu
With 3 M.E.S. Lamp sockets connected in \nparallel, on base with terminals, with three \nlamps of 3.5 V, 0.25 A. Part of the Malvern \nEnergy Transfer Kit
With 2 – 6 V DC motor with a 15 mm diameter pulley, mounted on base with terminals.
Limbs 280 x 5 mm bore with ends riffled & bent at 90° for rear connections, mounted on graduated plastics base.
Durable apparatus to study velocity, acceleration, and projectile motion. Marbles can be launched from five different speeds at any angle between 0 and 90°. Velocity of the marble can range from 3 m/s
Consists of two each of the seventeen blocks as follows: \nBlocks, 50 x 40 x 30 mm – Softwood, Hardwood, Paraffin wax, Aluminium, Iron and Foamed Polystyrene. \nBlocks, 20 x 20 x 100 mm – Perspex, Glass, Sla
Set of 12 assorted masses. The set comprises two each of brass, iron, aluminium, copper, zinc, and lead, masses varies from 12 to 25gm approx.
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Tin Metal strips of size about 200x12mm (length x width), supplied in pack of 10
A set of twelve metal strips for magnetism experiments. Each strip is stamped with a key letter for easy identification. The set contains magnetic and non-magnetic metals.
Comprises two brass cylinders of different diameters fitted with pistons and connected by a brass tube. Mounted on polished wooden base.
This is a small low \nconsumption electric \nmotor on a base \nspecially designed to run \ndirectly from the output of \nthe solar cell.
This is a small low \nconsumption electric \nmotor on a base \nspecially designed to run \ndirectly from the output of \nthe solar cell.
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
String. One of the most useful items to have in any workplace, nursery, school, or office. Our multi purpose string is made from 100% cotton to ensure great strength, and offers an almost endless list of possibilities. Comi
Newton’s Cradle – Large size to clearly explain the theory. Wooden frame consists of five nickel plated steel balls of uniform mass suspended from the frame. Includes instructions.
This demonstrates Newton’s principle that ‘action and reaction are equal and opposite’. If one of the steel balls is lifted and allowed to fall back at one end, then one will swing out the same distan
A versatile hands on tool for learning about numbers. Includes 20 x 10g weights. Specification Size: 655 x 210mm.
Suitable for use in a range of different environments, they are a single use and disposable option for situations where storage is limited. Each cup has been made from a premium food-grade, poly-coate
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
Approximately 28 cm long clamp designed to hold 3 pendulums, all pendulums can be individually adjusted without disturbing the others. With knurled thumbscrews to keep suspension cords secure.
Comprises two brass cylinders of different diameters fitted with pistons and connected by a brass tube. Mounted on polished wooden base.
PE-03 PH Electrode - Laboratory and Field Use Suitable for use with ZPH202 pH meter 12.3mm dia x 160mm Epoxy body, 1-13pH &n
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
Showing products per page
Steel shaft, pulley of 70 mm diameter Shaft overhangs the base to allow a wound up weight to fall down.
Easy assembly - no soldering ! The line tracking robot will follow a black line with its tracking sensor. You can design your own route for the robot using a black marker pen, black electrical tape etc. No soldering is required. Asse
Linear air track complete with blower, digital timer, photogates, accessories, boss head, support bar and rod. Square section aluminium alloy track, length 1.5 m, with staggered holes, supported on two light alloy castings. One suppo
Four glass tubes of different shapes & cross sectional areas are connected to a common horizontal tube, on wooden base.
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
Understanding the principles of physics that occur on a roller coaster has become easier. This triple play apparatus consists of three tracks – one straight down, one with one loop, and the third with
To demonstrate conservation of energy, conservation of momentum and projectile motion. Consists of a metal track to drop a steel ball, circular scale for measuring the angle at which the ball drops. Includes two steel balls and instructions. Size:
The set consists of two plastic, 10cm-diameter hemispheres. Each half has a wooden handle firmly attached to it. One of the hemispheres has a raised edge to hold a rubber seal, while the other hemisphere has a stopcock for attaching to vacuum tubi
Converts muscular energy to other forms of energy. 75 mm diameter hand cranked pulley with rubber belt to drive a small pulley of 20 mm diameter to which a drive output pulley is directly attached. Pulley shafts are mounted in bearings on aluminiu
With 3 M.E.S. Lamp sockets connected in \nparallel, on base with terminals, with three \nlamps of 3.5 V, 0.25 A. Part of the Malvern \nEnergy Transfer Kit
With 2 – 6 V DC motor with a 15 mm diameter pulley, mounted on base with terminals.
Limbs 280 x 5 mm bore with ends riffled & bent at 90° for rear connections, mounted on graduated plastics base.
Durable apparatus to study velocity, acceleration, and projectile motion. Marbles can be launched from five different speeds at any angle between 0 and 90°. Velocity of the marble can range from 3 m/s
Consists of two each of the seventeen blocks as follows: \nBlocks, 50 x 40 x 30 mm – Softwood, Hardwood, Paraffin wax, Aluminium, Iron and Foamed Polystyrene. \nBlocks, 20 x 20 x 100 mm – Perspex, Glass, Sla
Set of 12 assorted masses. The set comprises two each of brass, iron, aluminium, copper, zinc, and lead, masses varies from 12 to 25gm approx.
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Metal strips of size about 200x12mm (length x width), of different metals, each supplied in pack of 10
Tin Metal strips of size about 200x12mm (length x width), supplied in pack of 10
A set of twelve metal strips for magnetism experiments. Each strip is stamped with a key letter for easy identification. The set contains magnetic and non-magnetic metals.
Comprises two brass cylinders of different diameters fitted with pistons and connected by a brass tube. Mounted on polished wooden base.
This is a small low \nconsumption electric \nmotor on a base \nspecially designed to run \ndirectly from the output of \nthe solar cell.
This is a small low \nconsumption electric \nmotor on a base \nspecially designed to run \ndirectly from the output of \nthe solar cell.
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
String. One of the most useful items to have in any workplace, nursery, school, or office. Our multi purpose string is made from 100% cotton to ensure great strength, and offers an almost endless list of possibilities. Comi
Newton’s Cradle – Large size to clearly explain the theory. Wooden frame consists of five nickel plated steel balls of uniform mass suspended from the frame. Includes instructions.
This demonstrates Newton’s principle that ‘action and reaction are equal and opposite’. If one of the steel balls is lifted and allowed to fall back at one end, then one will swing out the same distan
A versatile hands on tool for learning about numbers. Includes 20 x 10g weights. Specification Size: 655 x 210mm.
Suitable for use in a range of different environments, they are a single use and disposable option for situations where storage is limited. Each cup has been made from a premium food-grade, poly-coate
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
Approximately 28 cm long clamp designed to hold 3 pendulums, all pendulums can be individually adjusted without disturbing the others. With knurled thumbscrews to keep suspension cords secure.
Comprises two brass cylinders of different diameters fitted with pistons and connected by a brass tube. Mounted on polished wooden base.
PE-03 PH Electrode - Laboratory and Field Use Suitable for use with ZPH202 pH meter 12.3mm dia x 160mm Epoxy body, 1-13pH &n
This track is modelled after the famous Brachistochrone problem. Using this track, you can test whether the path of the shortest length is the path of the quickest descent.
Showing products per page