Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
- MENU
-
Chemistry
-
Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
This simple, miniature, ammeter is an ideal way to make current measurements in electrical circuits. The ammeter is overload protected. Specification: Maximum current 2A DC Resolution 10 mA Accuracy ¬&no
The advanced signal generator is a versatile unit that has both high and \n low impedance outputs, making the unit ideal for driving vibration \n g
Polypropylene, autoclavable, unbreakable, non - corrosive, for easy handling and compact storage.
RUBBER STOPPER SOLID 15mm (Bottom 15mm) (Top 18mm) Length 24mm
The Bench Top Battery eliminator is designed to give the most popular battery voltages. Substitutes a wide variety of batteries including AA, AAA, C, D, and 9 V types. The voltage is conveniently sele
FEATURES: Constructed of high quality plastic and combined with stainless steel piston for many years of dependable service. Individually calibrated as per procedure laid down in ISO 8655 standards, a
FEATURES: Constructed of high quality plastic and combined with stainless steel piston for many years of dependable service. Individually calibrated as per procedure laid down in ISO 8655 standards, a
Loop piano wire is an accessory for vibration generator. It is used to demonstrate the wave motion, i.e., for demonstrating the relationship between frequency and the number of vibrational nodes
A very simple to use set of apparatus to compare the heat conductivity of four metal bars. Four bars, Aluminium, Steel, Copper and Bronze are set into a plastic holder. Each bar has attached to it a s
Ground glass syringe. Extremely useful for measuring and transferring fluids and gas samples, made of glass, prominent calibration markings assures accurate measurements. 100ml capacity
White polyester/cotton, with two side pockets and one breast pocket with press stud front fastening. Unisex design Length 39" Chest 42"
Soft dry wood for general laboratory work in bundle of 1000. 19cm long
An all metal ventilated lamp house having an open front with extended sides \nfinned externally for heat dissipation and vertical internal grooves to accommodate a slit plate. It has a light source comprising of a 12 volts lamp in a holder with on
A widely used, general purpose paper. Medium retention and flow rate. Pack of 100 circles
Chemical Labels, flammable substances (GHS02) 70 labels per sheet
Chemical Labels, acutely toxic substances (GHS06) 70 labels per sheet
Chemical Labels, corrosive substances (GHS05) 70 labels per sheet
Single use gloves made of top quality polyvinyl. Grade A. Non sterile gloves. Designed for medical and laboratory use. Ambidextrous. Hypoallergenic. Gloves are powder free. BSEN 455 part 1 compliant and AQL 1.5 medical grade. 100 gloves per
Specifications: Resistance:200 ohm, 2000 ohm, 20k ohm, 200k ohm, & 2000k ohm D.C.Voltage: 200 mV, 2000 mV, 20V, 200V & 1000 V A.C.Voltage: 200 & 750 V D.C.Current: 2000 uA, 20 mA, 200 mA, 10 A
To measure transpiration of water through a plant. Only one glass component ( the capillary tube) and is mounted on a strong backing plate. It consists of a capillary tube with a millimeter scale connected via three way tap to a syringe. The cut s
For the experimental determination of the specific heat capacity of different metals. Cylindrical metal blocks, mass 1kg adjusted to an accuracy of +/- 2%. Each block is drilled with two holes, a large central hole 12.5mm diameter for a special im
For the experimental determination of the specific heat capacity of different metals. Cylindrical metal blocks, mass 1kg adjusted to an accuracy of +/- 2%. Each block is drilled with two holes, a large central hole 12.5mm diameter for a special im
For the experimental determination of the specific heat capacity of different metals. Cylindrical metal blocks, mass 1kg adjusted to an accuracy of +/- 2%. Each block is drilled with two holes, a large central hole 12.5mm diameter for a special im
This fully sheathed miniature heater is designed for use with metal block calorimeters. It has a heating element enclosed in a stainless steel tube with two leads, having heat resistant insulation coming out of the seal
Crystal clear styrene jars with single thread and easy twist off cap. Ideal for viewing and transporting specimens. Specification Capacity 70cc. Pk30.
A pack of 100 disposable polythene aprons, with a halter neck and waist ties.
L813mm W410mm H910mm. Carrying capacity 125kgs. Fitted with quiet mark resisitant castors. Easy to clean and tough polypropylene shelves. Gap between shelf 31cm
Amber glass narrow neck winchester bottles with black cap and LDPE polycone liner.
For laboratory stand, die casted alloy, accepts rods up to 16mm dia. Which are secured with nickel-plated Tommy screws.
Moulded in polypropylene, consist of spoon at one end, while other end is flat. Size 15cm.
Complete with rod, sheet iron base, stoved enamelled with hole, iron rod 12.5mm dia, nickle plated. One end of the rod is rounded the other end is machine threaded. Base size 20 x 12.5cm. Rod length 60cm
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
With straight bore PTFE key, class B made of Borosilicate glass, with a leak proof PTFE conforms to BS5846. Capacity 50 x 0.1ml
Top triangular, all steel welded, and legs are bent outwards for stability. Length of one side is 12.5cm and height is 20cm.
Made of neutral glass, bulb form single graduation on upper stem, permanent blue stained graduation
Slotted masses each made of zinc coated steel. A set comprising of a 10g hanger and 9 \nslotted masses each of 10g, total mass 100g
Non-optically worked with polished faces, edges slightly beveled. Nominal angles 90 x 45 x 45. Size: 50mm
Showing products per page
This simple, miniature, ammeter is an ideal way to make current measurements in electrical circuits. The ammeter is overload protected. Specification: Maximum current 2A DC Resolution 10 mA Accuracy ¬&no
The advanced signal generator is a versatile unit that has both high and \n low impedance outputs, making the unit ideal for driving vibration \n g
Polypropylene, autoclavable, unbreakable, non - corrosive, for easy handling and compact storage.
RUBBER STOPPER SOLID 15mm (Bottom 15mm) (Top 18mm) Length 24mm
The Bench Top Battery eliminator is designed to give the most popular battery voltages. Substitutes a wide variety of batteries including AA, AAA, C, D, and 9 V types. The voltage is conveniently sele
FEATURES: Constructed of high quality plastic and combined with stainless steel piston for many years of dependable service. Individually calibrated as per procedure laid down in ISO 8655 standards, a
FEATURES: Constructed of high quality plastic and combined with stainless steel piston for many years of dependable service. Individually calibrated as per procedure laid down in ISO 8655 standards, a
Loop piano wire is an accessory for vibration generator. It is used to demonstrate the wave motion, i.e., for demonstrating the relationship between frequency and the number of vibrational nodes
A very simple to use set of apparatus to compare the heat conductivity of four metal bars. Four bars, Aluminium, Steel, Copper and Bronze are set into a plastic holder. Each bar has attached to it a s
Ground glass syringe. Extremely useful for measuring and transferring fluids and gas samples, made of glass, prominent calibration markings assures accurate measurements. 100ml capacity
White polyester/cotton, with two side pockets and one breast pocket with press stud front fastening. Unisex design Length 39" Chest 42"
Soft dry wood for general laboratory work in bundle of 1000. 19cm long
An all metal ventilated lamp house having an open front with extended sides \nfinned externally for heat dissipation and vertical internal grooves to accommodate a slit plate. It has a light source comprising of a 12 volts lamp in a holder with on
A widely used, general purpose paper. Medium retention and flow rate. Pack of 100 circles
Chemical Labels, flammable substances (GHS02) 70 labels per sheet
Chemical Labels, acutely toxic substances (GHS06) 70 labels per sheet
Chemical Labels, corrosive substances (GHS05) 70 labels per sheet
Single use gloves made of top quality polyvinyl. Grade A. Non sterile gloves. Designed for medical and laboratory use. Ambidextrous. Hypoallergenic. Gloves are powder free. BSEN 455 part 1 compliant and AQL 1.5 medical grade. 100 gloves per
Specifications: Resistance:200 ohm, 2000 ohm, 20k ohm, 200k ohm, & 2000k ohm D.C.Voltage: 200 mV, 2000 mV, 20V, 200V & 1000 V A.C.Voltage: 200 & 750 V D.C.Current: 2000 uA, 20 mA, 200 mA, 10 A
To measure transpiration of water through a plant. Only one glass component ( the capillary tube) and is mounted on a strong backing plate. It consists of a capillary tube with a millimeter scale connected via three way tap to a syringe. The cut s
For the experimental determination of the specific heat capacity of different metals. Cylindrical metal blocks, mass 1kg adjusted to an accuracy of +/- 2%. Each block is drilled with two holes, a large central hole 12.5mm diameter for a special im
For the experimental determination of the specific heat capacity of different metals. Cylindrical metal blocks, mass 1kg adjusted to an accuracy of +/- 2%. Each block is drilled with two holes, a large central hole 12.5mm diameter for a special im
For the experimental determination of the specific heat capacity of different metals. Cylindrical metal blocks, mass 1kg adjusted to an accuracy of +/- 2%. Each block is drilled with two holes, a large central hole 12.5mm diameter for a special im
This fully sheathed miniature heater is designed for use with metal block calorimeters. It has a heating element enclosed in a stainless steel tube with two leads, having heat resistant insulation coming out of the seal
Crystal clear styrene jars with single thread and easy twist off cap. Ideal for viewing and transporting specimens. Specification Capacity 70cc. Pk30.
A pack of 100 disposable polythene aprons, with a halter neck and waist ties.
L813mm W410mm H910mm. Carrying capacity 125kgs. Fitted with quiet mark resisitant castors. Easy to clean and tough polypropylene shelves. Gap between shelf 31cm
Amber glass narrow neck winchester bottles with black cap and LDPE polycone liner.
For laboratory stand, die casted alloy, accepts rods up to 16mm dia. Which are secured with nickel-plated Tommy screws.
Moulded in polypropylene, consist of spoon at one end, while other end is flat. Size 15cm.
Complete with rod, sheet iron base, stoved enamelled with hole, iron rod 12.5mm dia, nickle plated. One end of the rod is rounded the other end is machine threaded. Base size 20 x 12.5cm. Rod length 60cm
Extra soft quality confirms to Govt. specifications, resistance to acids and alkalis Pack of 10Mtr.
With straight bore PTFE key, class B made of Borosilicate glass, with a leak proof PTFE conforms to BS5846. Capacity 50 x 0.1ml
Top triangular, all steel welded, and legs are bent outwards for stability. Length of one side is 12.5cm and height is 20cm.
Made of neutral glass, bulb form single graduation on upper stem, permanent blue stained graduation
Slotted masses each made of zinc coated steel. A set comprising of a 10g hanger and 9 \nslotted masses each of 10g, total mass 100g
Non-optically worked with polished faces, edges slightly beveled. Nominal angles 90 x 45 x 45. Size: 50mm
Showing products per page