Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
- MENU
-
Chemistry
-
Desktop
Tablet & Mobile
01691 770366 | sales@selectschoolsupplies.co.uk
Non-RoHS Photoconductive cadmium sulphide cell with a spectral response similar to the human eye. As light falling on the cell increases, so the resistance of the cell decreases. Peak spectral response: Typ. 550 nm
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
For ordinary magnets, iron bars, strips etc. Consists of a 250 mm long solenoid wound with insulated copper wire and mounted on a base, with switch and 4mm terminals. Operating voltage is 12 V A.C. or D.C. At 6A max.
This rugged 3 digit Multimeter has a dual slope A-D converter uses C-MOS technology for auto-zeroing, polarity selection and over-range indication. It is ideal for use by electricians, electronic engineers, general industry & laboratories
This kettle features a good size capacity has and energy saving technology. - 2.2 kW. - 1.7 litre capacity. - Boil dry protection automatically switches off when the kettle is empty. -
Regulated DC Power Supply 3V-12V/3A (6 Outputs) DC power supply unit provides regulated DC output voltage with excellent load and line regulation. Description • Compact and Light Weight Design • Fire
SATZ ZPS15 School Power Station Output Voltage selectable: 3V, 4.5V, 6V, 7.5V. 9V, 12V DC Output Current: ZSP15 1.5A - ZSP30 3A Output : Smoothed and regulated Ripple & Noise: less th
The ring launcher consists of a vertically mounted solenoid of thick copper wire with an iron core. The coil is energized with by pressing the push button on the panel. Two aluminium rings are supplied with the apparatus. These rings
A compact kit to illustrate the way electricity is transported around the country. Compri ses two boxes (step up substation and step down substation) and a set of ‚Äö√Ñ√∂‚àö√&e
A floating, high voltage power source useful for supplying charge for quantitative electrostatic experiments, gas discharge tubes needing a filament supply and spectrum tubes. Continuously variable output up to 5kV. 6V/1A AC or 12V/0.5A AC filamen
Sufficient for approximately 500 sample spots) A mixture of cyan, magenta, blue inks which appear black when mixed and separates out into bright constituent colours when subject to card chromatography or electrophoresis.
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
A 250W tungsten filament bulb available with screw fitting, internally silvered.
A solar kit incorporating 3 independent modules within a sealed miniature solar panel, enabling a range \nof experiments using voltages between 1.5V and 4.5V and outputs from 100mA up to 300mA. \nComplete with stand, low-inertia DC motor, motor st
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
To produce mechanical vibrations when used with a signal generator. The unit is \nmounted on a strong base and is enclosed in a plastic case. A threaded extension \nof the armature allows attachment of the item to be vibrated, e.g., plates for chl
Showing products per page
Non-RoHS Photoconductive cadmium sulphide cell with a spectral response similar to the human eye. As light falling on the cell increases, so the resistance of the cell decreases. Peak spectral response: Typ. 550 nm
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
For ordinary magnets, iron bars, strips etc. Consists of a 250 mm long solenoid wound with insulated copper wire and mounted on a base, with switch and 4mm terminals. Operating voltage is 12 V A.C. or D.C. At 6A max.
This rugged 3 digit Multimeter has a dual slope A-D converter uses C-MOS technology for auto-zeroing, polarity selection and over-range indication. It is ideal for use by electricians, electronic engineers, general industry & laboratories
This kettle features a good size capacity has and energy saving technology. - 2.2 kW. - 1.7 litre capacity. - Boil dry protection automatically switches off when the kettle is empty. -
Regulated DC Power Supply 3V-12V/3A (6 Outputs) DC power supply unit provides regulated DC output voltage with excellent load and line regulation. Description • Compact and Light Weight Design • Fire
SATZ ZPS15 School Power Station Output Voltage selectable: 3V, 4.5V, 6V, 7.5V. 9V, 12V DC Output Current: ZSP15 1.5A - ZSP30 3A Output : Smoothed and regulated Ripple & Noise: less th
The ring launcher consists of a vertically mounted solenoid of thick copper wire with an iron core. The coil is energized with by pressing the push button on the panel. Two aluminium rings are supplied with the apparatus. These rings
A compact kit to illustrate the way electricity is transported around the country. Compri ses two boxes (step up substation and step down substation) and a set of ‚Äö√Ñ√∂‚àö√&e
A floating, high voltage power source useful for supplying charge for quantitative electrostatic experiments, gas discharge tubes needing a filament supply and spectrum tubes. Continuously variable output up to 5kV. 6V/1A AC or 12V/0.5A AC filamen
Sufficient for approximately 500 sample spots) A mixture of cyan, magenta, blue inks which appear black when mixed and separates out into bright constituent colours when subject to card chromatography or electrophoresis.
For use with the motor to demonstrate the \nproduction of electrical energy directly from \nlight energy. The apparatus comprises a \nselenium photo-voltic cell.
A 250W tungsten filament bulb available with screw fitting, internally silvered.
A solar kit incorporating 3 independent modules within a sealed miniature solar panel, enabling a range \nof experiments using voltages between 1.5V and 4.5V and outputs from 100mA up to 300mA. \nComplete with stand, low-inertia DC motor, motor st
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
A range of encapsulated solar cell modules mounted in sturdy black polycarbonate cases. The faceplate consists of tiny bubble magnifiers which maximise performance by enhancing light as it strikes the cell. Monocrystalline constructi
To produce mechanical vibrations when used with a signal generator. The unit is \nmounted on a strong base and is enclosed in a plastic case. A threaded extension \nof the armature allows attachment of the item to be vibrated, e.g., plates for chl
Showing products per page